Tips for Recording a Sound Effect Library
In order to record sound effects for a personal or professional sound effect library one first needs a quality recorder. Personally I've tried all sorts of pricey gear and microphones throughout my sonic adventures only to discover that a solid $150 to $400 handheld digital recorder no larger than an old-school cassette tape box suffices to create sounds good enough for placement in any Film, TV, and media project. In addition, these units run on battery power and the recorded files can be dragged onto your desktop via USB.
Since video has a 48k sample rate then sound effects supplied for video need to be 48k, not the standard 44.1k used for CDS, so any recorder you purchase must be able to record up to 48k quality. If you have a library of 44.1k these samples always have to be up-converted by a video editor and their quality can be compromise. Therefore, do yourself the favor of recording at 48k and you will have a more valuable and usable sound effect collection.
You will need to record two distinct types of sound effects: "ambiences" and "hits." Short single sonic moments such as glass breaking, an explosion, or a light switch click are called hits. Longer recordings of background noises such as those found on a playground, at a train station, or in an airport are called ambiences.
Any quality sound effect library needs both types of sound effects so you should be intent on recording both types. Ambiences are the easiest to obtain because they require only being at a location, standing there, and recording. Hits, though, need more planning because you often need to do foley to get what you need or wait around at various locations for the right moment, such as visiting a new mother and her newborn in order to capture that perfect baby cry.
The basics of recording a sound effect is literally as simple as hitting the record button. However, there are several tips to keep in mind in order to get the best recordings possible.
1. Make sure that you record as "hot" as possible, meaning with the loudest signal that does not clip or overload the microphone. If you notice a red LED light blinking when recording it means that your incoming signal is too hot and you will want to pull back your mic a bit from the source. You want the loudest signal without distortion.
2. In order to record sounds with high decibel levels, such as fireworks or loud crowds, buy a 10dB pad which will fit between the digital recorder and your microphone. For $20 purchased online, this pad will lower the incoming signal by 10dB
3. While you want to minimize unwanted sounds and noise in your recordings as much as possible, do not obsess over finding the quietest recording environment because great sound effects can occur unexpectedly such as a beefed up motorcycle cruising by. If you are too uptight about getting that perfect recording environment you will slow yourself down in your efforts to gain content and just remember that you can always filter much background noise from your recordings during the editing process.
4. Protect the microphone with a windscreen or simply keep your recorder out of the wind by using physical barriers such as trees, walls, or even your jacket, because wind hitting the microphone head will ruin your recording efforts. Sometimes wind noise can be cut out during editing with a high pass filter and cutting frequencies below 200-500 khz but for the most part wind will destroy your work.
5. Make sure that your recordings do not contain any live or amplified music from a third party. Your recordings will be useless if they include music from such sources. This music is copyrighted and without permission of the copyright owner it is illegal to use or license such recordings.
These tips are simple and meant to point an aspiring sound effect artist in the right direction toward the creation of a sound effect library for use or for sale online. Future articles will discuss the process of editing, categorizing, and marketing these raw recordings.
Since video has a 48k sample rate then sound effects supplied for video need to be 48k, not the standard 44.1k used for CDS, so any recorder you purchase must be able to record up to 48k quality. If you have a library of 44.1k these samples always have to be up-converted by a video editor and their quality can be compromise. Therefore, do yourself the favor of recording at 48k and you will have a more valuable and usable sound effect collection.
You will need to record two distinct types of sound effects: "ambiences" and "hits." Short single sonic moments such as glass breaking, an explosion, or a light switch click are called hits. Longer recordings of background noises such as those found on a playground, at a train station, or in an airport are called ambiences.
Any quality sound effect library needs both types of sound effects so you should be intent on recording both types. Ambiences are the easiest to obtain because they require only being at a location, standing there, and recording. Hits, though, need more planning because you often need to do foley to get what you need or wait around at various locations for the right moment, such as visiting a new mother and her newborn in order to capture that perfect baby cry.
The basics of recording a sound effect is literally as simple as hitting the record button. However, there are several tips to keep in mind in order to get the best recordings possible.
1. Make sure that you record as "hot" as possible, meaning with the loudest signal that does not clip or overload the microphone. If you notice a red LED light blinking when recording it means that your incoming signal is too hot and you will want to pull back your mic a bit from the source. You want the loudest signal without distortion.
2. In order to record sounds with high decibel levels, such as fireworks or loud crowds, buy a 10dB pad which will fit between the digital recorder and your microphone. For $20 purchased online, this pad will lower the incoming signal by 10dB
3. While you want to minimize unwanted sounds and noise in your recordings as much as possible, do not obsess over finding the quietest recording environment because great sound effects can occur unexpectedly such as a beefed up motorcycle cruising by. If you are too uptight about getting that perfect recording environment you will slow yourself down in your efforts to gain content and just remember that you can always filter much background noise from your recordings during the editing process.
4. Protect the microphone with a windscreen or simply keep your recorder out of the wind by using physical barriers such as trees, walls, or even your jacket, because wind hitting the microphone head will ruin your recording efforts. Sometimes wind noise can be cut out during editing with a high pass filter and cutting frequencies below 200-500 khz but for the most part wind will destroy your work.
5. Make sure that your recordings do not contain any live or amplified music from a third party. Your recordings will be useless if they include music from such sources. This music is copyrighted and without permission of the copyright owner it is illegal to use or license such recordings.
These tips are simple and meant to point an aspiring sound effect artist in the right direction toward the creation of a sound effect library for use or for sale online. Future articles will discuss the process of editing, categorizing, and marketing these raw recordings.
About the Author:
SFXsource's sound effects collection that contains a wide variety of sfx categories can be visited, auditioned, and downloaded at Download Sound Effects, and Free Sound Effects and Loops
posted by Marcondes Allen at 12:05 AM
0 Comments:
Post a Comment
<< Home